PRODUCT SYSTEMS DETAILS PERFORMANCE EFFECTS SPECS MANUAL UPDATER CONTACT BUY NOW

FIRMWARE UPDATER

Update from the browser.

The latest firmware for each kind of unit is built into this page: there is nothing to download. Choose your unit, start ADEPT in boot mode, connect USB, and press Update. Follow each stage below while the updater prepares the flash, transfers the image, then releases MIDI while ADEPT verifies and restarts. Confirm the new firmware version on the unit when prompted.

  1. Hold Blue + White while powering on ADEPT. Connect USB, then press Rescan. The device should appear as ADEPT Bootloader.
  2. Choose your unit: BETA UNIT (original screen) or PRODUCTION UNIT (new screen, SD card slot). Firmware v1.80 for that unit is loaded and checked; its header is checked again before anything is written.
  3. Press Update. Flash preparation takes about 80 seconds; the erase display shows elapsed time and an estimated countdown. Upload begins automatically. Keep USB and power connected through every stage.
LATEST
v1.80
CONNECTION
USB (WEBMIDI SYSEX)
BROWSER
CHROME / EDGE
DEVICE

Hold Blue + White during power-on, then connect USB and press RESCAN.

YOUR UNIT
ADEPT v1.80 · choose your unit Choose BETA UNIT or PRODUCTION UNIT.

Do not disconnect USB or power down during the update. Requires Chrome or Edge on desktop over HTTPS, with MIDI (SysEx) allowed for this site. If the bootloader does not appear, power up again holding BLUE + WHITE and press Rescan. If the screen looks wrong after an update, start boot mode again and update with the other unit chosen.

WHAT'S NEW

V1.80 LATEST
  • Two versions: BETA UNIT (original screen) and PRODUCTION UNIT (new screen, SD card slot). Choose your unit in the update box
  • Generate tab: a moving picture for each ROLE, for MONO and POLY, NOTE RANGE, LOOPS and VARIANT
  • NOTE RANGE shows the range that is set, for example C2-C5
  • Sequence tab: moving pictures for SWING, CONDITION, DYNAMICS, LFO MOD, CROSS MOD, NOTE SHIFT and MUTE/SOLO
  • DYNAMICS shows its mode with the value, for example GATE 10 or VEL 94%
  • Text that is too long for its box now scrolls, for example the MIDI SPLIT modes
  • New look: White pad menu, new sidebar, track colours and a picture for every mode
  • MUTE and SOLO for each playhead, on every track type
  • Conductor: COMPOSE builds a song from sections and chords; CALL & RESPONSE lets one track answer another
  • REACT works on every loop, with TARGET and PLAY/REST
  • Generator: one TYPE for each ROLE and a new BASSLINE role; drum grooves rebuilt
  • Drum map and MIDI Learn are saved with each project
  • Works with the ADEPT Link App
  • Manual 1.715 (a new manual is coming)
V1.71.17
  • MODU LFO moves through the drawn curve again, like before V1.71.15, instead of just shifting it up and down
  • MODU Generator: CYCLE, PHASE, AMPLITUDE, OFFSET and SMOOTH reshape a drawn curve; turn them back and your drawing comes back
  • Manual 1.715
V1.71.16
  • A MODU row can drive a MOD (MOD A/B/C, MOVES, AMOUNT), and the MOD shows its source
  • MODU LFO animates the curve again
  • Manual 1.713
V1.71.15
  • Joystick: JOY AUTO SCROLL on/off and a better dead zone
  • MOD LFO RATE/DEPTH fixed; Track LFO SPEED is correct
  • MODs keep their own PLAY/REST per step
  • Vari keeps each colour's LENGTH
  • VENN and RIBBON removed
  • Every firmware image now carries its build id
V1.71.14
  • AUTO VARI keeps the kick and the backbeat in place
V1.71.13
  • MIDI Router sequencer: encoders turn the right way, and every step is pre-filled and routable
V1.71.12
  • Drum Generator: TECHNO and HOUSE grooves rebuilt
  • PACHINKO: 32-node board, and the DENSITY row is back
  • KEYS CUBE: GENERATE fills only the shown colour
V1.71.11
  • Drum Generator: BREAKBEAT, DNB, ELECTRO and IDM grooves rebuilt
V1.71.10
  • MIX: a fader moves only the playheads lit on it (tap P1/P2/P3)
  • New NOTE GRID tracks start on STANDARD; picking STANDARD sets the whole track
  • KEYS GENERATE: colours share chords, hand-placed notes are kept, ROLE builds from your motif
  • DENSITY adds or removes one note per click and keeps the pattern
  • CLEAR lets you pick which colours to clear
  • CUBE: DRUM DENSITY counts nodes, and a new CUBE opens empty
  • Spatial TRACK fixes (no silent tracks after delete or reorder)
V1.71.9
  • Switching tracks no longer changes what other tracks send (MIDI clock/start/stop, HUMANIZE, loop conditions, ARP, AUTO VARI)